Product features:

1. Water soluble dilution, non-toxic, approximately zero VOC emission, rapid drying time;
2. Good resin stability and strong adaptability to paint matching;
3.One time thick coating 100μm, no cracking, no falling off;
4.With good adhesion and flexibility, improve the construction efficiency, can be made into a bottom surface coating;
5.According to the market demand, optimized configuration, can be configured with excellent performance, can replace the traditional solvent based waterborne functional new state anticorrosive coating.

Application scope:

1.Cost-effective waterborne functional new state anticorrosive coating;
2.Waterborne functional new state anticorrosive high temperature coating;
3.The bottom surface of one anticorrosive coating.

Product specification:

Appearance: Gray liquid
Viscosity: (25℃. -4 cups,)S: ≥12
PH:≥10
Solvent dilution: a small amount of water
Solid content, %: ≥26

Recommended formula:This product waterborne functional new state anticorrosive coating special resin for independent adhesive, use with the powder according to a certain proportion of configuration, that is to form a complete product form. Do not need to add any resin, additives, etc. Pushing ratio of 30%: 70%(powder), 35%: 65%(powder).
Storage: Store in a cool and ventilated (0℃-30℃) environment for 12 months
Packing specification: 200kg plastic drum
Legal declaration: this information is based on our knowledge and provide, the specific production formula and production process by the manufacturers according to their own needs before the production of the experiment, we can not be used as a legal guarantee.